Driveway Cleaner for Block Paving, Natural Stone and Concrete - 1 Litre
Customer Reviews
Before cleaning my block paving drive which I do every 2/3 years with just a pressure wash, I used this product before using the pressure wash and I can honestly say it speeded up the cleaning process. Would definitely recommend.
Superb product, a must for pre-cleaning surfaces mentioned above. A quick simple process that gets amazing results even before the pressure wash. Used on every job.
impressed with this product I thought my drive was clean after I pressure cleaned it but once this cleaner was sprayed on it lifted the dirt that I didn't know was there. good product
Used it to clean my pattern imprinted concrete drive before applying sealant. Very good product.
Before cleaning my block paving drive which I do every 2/3 years with just a pressure wash, I used this product before using the pressure wash and I can honestly say it speeded up the cleaning process. Would definitely recommend.
Makes cleaning hard surfaces a lot easier. Water pressure alone is good but add a little Driveway Cleaner to your system or pre-treat the surface prior to washing and the results are amazing. Do the job once and do it right - try using Driveway Cleaner and you'll never use anything else.
Use this for the first time followed the instructions as directed by Smart Seal. Was amazed by what happened after brushing in on told loads of muck and crap of the drive. Would also use in future
HAVE A QUESTION?
Description
Driveway cleaner to remove dirt and stains from driveways. A great traffic film remover for cleaning block paving, concrete and natural stone.
A brick paving cleaner that can quickly clean cobblelock driveways. Once the driveway has been cleaned, a sealer for concrete or brick paving can be applied to protect it.
Effective driveway cleaner for best results when pressure washing driveways.
KEY PROPERTIES
- Fast acting biological degreaser
- Biologically accelerates the degradation of oil and general stains
- Converts oil into harmless CO2 and water
- Contains Euro Type 1 bacteria − non-pathogenic and harmless to humans
- Not flammable, combustible or corrosive
- Will not contribute to surface erosion
- Fully biodegradable: > 90% in 28 days
- For Oil Removal use at 4% dilution
- Not classified as hazardous at recommended dilutions
Technical
Dilute at a ratio of approx 1 to 4 or 5 to create 20-25 litres of cleaning fluid (which will cover approx 125 m2 of paving)
Dampen surface, then apply product by either sprayer or watering can. For best results, once applied, work into surface with a stiff broom and leave for 20 minutes, then clean surface normally with pressure washer.
Before cleaning my block paving drive which I do every 2/3 years with just a pressure wash, I used this product before using the pressure wash and I can honestly say it speeded up the cleaning process. Would definitely recommend.