Delivery
From 4.05*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By Brendan FlynnFROM Ireland

The repair sealer and the Patio Matt sealer that we used were excellent. The repair sealer was used. Left to dry for 24 hrs we then used the Matt sealer (3 coats) to give the patio a proper seal and a lovely look.

By James Rooney FROM Co meath Ireland

Just right what I wanted it for. Done the job perfect. Thanks again

By John MadgeFROM

Applied the repair fluid to the sealant where damp had caused it to look white and it has solved the problem. Very pleased with the prompt response from Smartseal to help resolve the problem. Thanks.

READ MORE REVIEWS
Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Sealer Repair Fluid - Removes Surface Whiteness Caused By Moisture Trapped Under the Sealer.

Also fixes sealer that has lifted or peeled off; needs working in to the white patches vigourously to break the existing seal.

52.95
In Stock
Please select a size
Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

Sealer Repair Fluid for removing whiteness on Imprinted Concrete and Block Paved Surfaces

If the solvent based imprinted concrete or block paving sealers have been applied in conditions when the surface is damp this can lead to problems. Surface whiteness is the most common issue and appears over time if the sealer has been applied when the surface is damp.

Smartseal sealer repair fluid should be used when problems like patchy whiteness have appeared on the surface of existing imprinted concrete or block paved driveways and patios. Surface whiteness, peeling or flaking sealer are common issues that are easily corrected using sealer repair fluid.

Smartseal Sealer Repair Fluid will restore existing imprinted concrete sealer or block paving sealer and clear surface whiteness from imprinted concrete and block paved surfaces.

  • Coverage ratio: 3 - 4 m per litre
Technical

Sealer repair fluid is a product designed to repair incorrectly applied sealer which is lifting or sealer which has reacted with moisture during the drying process. For imprinted concrete it should be liberally applied to the affected area, left for a couple of minutes and then worked into the surface with a soft broom. This will 'soften' the sealer and allow it to re-bond to the concrete.

For removal of surface whiteness to imprinted concrete or block paving repeat as instructions above, but with block paving be careful not to disturb the jointing sand when working the sealer repair fluid into the surface of the blocks. 

Health & Safety

Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator, gloves and safety glasses when applying. Store in a cool place. Flash point 42°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.

Product FAQs
Ask Us A Question
Send us a question
Delivery

QUICK AND RELIABLE DELIVERY THROUGHOUT IRELAND

We offer a delivery service across Ireland for all of our products. 

We provide a comprehensive guarantee of quality and ensuring a reliable nationwide delivery service to all our customers is very important. It does not matter if you live in Dublin, Cork, Sligo or Limerick, our service is as consistent and reliable as can be. This is a testament to the many satisfied customers that have commented on our delivery service over the years. 

We can deliver to another address if you are not going to be in to receive the products. If you notify us with clear delivery instructions, we can also leave with a neighbour or somewhere at your property without a signature.

It is also our aim to monitor our stock levels closely to ensure we can always fulfill demand and make sure products are sent out as soon as possible.

Please read the section relating to deliveries under our Terms and Conditions.

Share this product
 
COMPARISON BASKET COMPARE