Slate Sealer - Colour Enhanced Finish (Available in 5 litre size) Long Lifespan, Enriches Natural Colours- Easy to Apply

92.95
inc VAT
1 Reviews|(5/5)
Please select a size
In Stock In Stock
Sample Available Slate Sealer  -  Colour Enhanced Finish  (Available in 5 litre size) Long Lifespan, Enriches Natural Colours- Easy to Apply
Quick Tips & Advice

Customer Reviews

Excellent product, did exactly as promised. Service from the company could not have been better. Deliver next day

StarStarStarStarStar
By Seamus Mc Dermott From Mullingar, Co Westmeath

Leave A Review

Product Rating  *  *  *  *  *

*All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

HAVE A QUESTION?

CAN'T FIND THE ANSWER YOU NEED? ASK US A QUESTION

Description

Step-by-Step Video Guide

Natural Stone Sealer with Colour Enhancing Effect

Protective impregnating sealer to enhance the colour of Natural Stone

Smartseal Indian Sandstone Sealer and Natural Stone Sealer is a high quality, clear, solvent free acrylic impregnating coating system. Application of the sealer will alter the chemical structure of the porous sandstone or natural stone providing a excellent water repellent and stain resistant surface.

The sealer, once applied, will give a damp or slightly wet look finish on natural stone and enhance the original colouring of the surface.

  • 1 x 25 litre will treat up to 150 m²
  • Resistant to algae, lichen and staining
  • Will leave surface darker or 'damp' looking dependent on porosity of surface
  • Average coverage 5 - 10 m² per litre first coat and 10 - 20 m² per litre second coat, dependent on porosity and finish of surface
  • Application by roller or sprayer
  • Touch dry 2 - 3 hours
  • Fully waterproof in 24 hours
  • Lifespan of up to 5 years can be expected
  • Suitable for Sandstone** (see exceptions below), Limestone, Terracotta, Slate, Marble and Granite
  • Can be used externally or internally

**Exceptions to Sandstone suitability: 

Please note this product is not suitable for Kandla Grey (mid and light grey) sandstone

Technical

PREPARATION: Prior to application of sandstone sealer or natural stone sealer ensure surfaces to be sealed are clean, dry and free from contamination. If algae or stains are present pre-treat prior to cleaning with an appropriate cleaning product.

**If applied to a surface where a "sweep-in" pointing compound has been used within the last 6 months, the natural stone must be fully cleaned with Smartseal Residue Remover prior to sealant application.**

APPLICATION: A suitable pressure sprayer or roller is recommended taking care to avoid any pooling. Application on all substrates should be to full saturation and on vertical surfaces commence at the bottom and work upwards.

Remove any excess after approx 30 - 40 minutes.

  • For best results, apply one coat to saturation, and once touch dry (normally around 45 min), apply a second coat "wet on wet" (which means before the 1st coat has totally dried) 
  • Do not apply in damp conditions
  • Application temperature range: 15° to 23°C 
  • Shake container well before use.

All equipment should be cleaned with water immediately after use.

SHELF LIFE: Store away from direct sunlight and sources of heat. Protect from frost.
12 months (in original sealed container).

 
×