Solvent Free Block Paving Sealer (Eco Friendly) - Available in 5 & 25 Litre containers - No Smell or Fumes.
Customer Reviews
I purchased two drums of the Eco-friendly Smartseal block drive sealant. It was easy to use and the instructions, supported by an online video, were easy to follow. Ajob well done, I think.
We always use the Solvent Free Block Paving Sealer (Eco Friendly) on our block paving. Easy to use, no smell and a fantastic finish.
So far it seems to be good, but as I told you on the phone my drive is not level and the Sealer ran down very quick in the joints. I had to order another two as I ran out very quickly. I would rate it 3. It may get better when finished.
the product was very easy to use,customer was delighted with end result
HAVE A QUESTION?
Description
Step-by-Step Video Guide
Solvent Free and Eco Friendly Block Paving Sealer
Water based weed inhibitor for sealing brick paving
A non-solvent sand hardener and block paving sealer that is quick and easy to apply on block paved drives and patios. It inhibits the growth and spread of weeds in and moss and protect blocks. The eco-friendly cobblelock sealer will harden jointing sand on brick paving and help prevent weed growth. A solvent free brick paving sealer and weed inhibitor.
APPLICATION and PREPARATION GUIDE
- Soaks deep into jointing sand
- apply 1 or 2 coats (see coverage)
- Hardens jointing sand
- Helps to prevent weed growth
- Applied by watering can and squeegee
- Manufactured to BS5750/ISO9001 standards
- Added Oil resistance to paving
COVERAGE:
For optimum results allow the block paving sealer to soak into the joints around 20mm deep. Apply at a ratio dependent on width of joints at 1.5 m2 per litre first coat and approx 4.0 m2 second coat
APPLICATIONS:
Only suitable for use on standard concrete based block pavers - Not to be applied to clay pavers.
Technical
Block Paving Sealer (eco friendly) - See 'How To' Video Guide
PREPARATION: New Blocks Apply as soon as possible after installation. Remove excess sand. Apply above 8°C. Do not apply to wet surfaces, or if rain is forecast within 8 hours.
Older block paving: Thoroughly clean off the blocks with power wash, stain remover and fungicidal wash as necessary. Allow blocks to completely dry before re-applying jointing sand until all joints are properly filled before application of Weed Inhibitor / Sand Hardener.
APPLICATION: By watering can or direct from container, apply liberally, working solution across surface with squeegee. Ensuring full absorption into depth of jointing sand.
COVERAGE: Dependent on depth of pavers 1m² / 2m² per litre. Product will appear opaque when wet, but will be clear when dry.Ensure adequate supplies of product are available. Agitate drum before opening, keep sealed when not in use. Clean spillages with water.
HEALTH & SAFETY:
Harmful by inhalation and if swallowed. Irritating to skin.
Wear appropriate safety wear at all times.
***NOT TO BE USED ON CLAY PAVERS
Delivery was very quick had my product in 3 days.the instructions were easy to follow.i went with the solvent free sealer and I found it very easy to use.i would recommend this product and I will use these products again.thanks smartseal