From 4.05*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By Brendan Lane

Used on my 30 year old drive and was very happy with the results. Used the stain and finished with a sealer. Only issue and it's a small one is that smaller sample quantities are very expensive. I had a black drive with 20 red bricks as edging and had to buy 5 litres for 30 blocks. Great product.

By Eric Ambagtsheer

Brilliant sealer, paving looks as new, only problem is that it's hard to get 4 dry days to dry out the blocks before applying the sealant

By Patrick O'HaraFROM Dublin

Excellent products very impressed

Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Block Paving Sealer - SILK (5 & 25 litre) - High Quality Durable Sealer,Sand Hardener & Weed Inhibitor

Leaves a long term colour enhancing 'satin' finish on block paving

In Stock
Please select a size
Visa Electron
Product Description

Block Paving Sealer in Silk finish

Brick paving sealer in SILK that will give a 'satin' type finish to block paved surfaces

Smartseal Block Paving Sealer in Silk is a solvent based acrylic sealer that has been developed to enhance the original colour of new or older block paving on driveways and patios. It is very hard wearing and will extend the lifespan of any block paved surface. The cobblelock sealer in Silk creates a wet look effect on block paving, especially after a few coats.
The sealer for brick paving will help to prevent the regrowth of weeds. The cobblelock sealer will also protect against oil stains.

  • Use as a final coat when sealing block paving
  • Simply application by sprayer or roller
  • Very oil and stain resistant
  • Makes maintenance easier
  • Prevents weed growth in joints of pavers
  • Manufactured to BS5750/ISO9000 quality 
  • Suitable for most types of block paving** 
  • Will not flake or peel and seals concrete permanently
  • Very hard wearing
  • Colour protective and UV light resistant

Recommended coverage 
First coat: 2.0sq. metres per litre
Second coat: 3.5sq metres per litre




Smartseal Block Paving sealer can be applied using a sprayer unit or roller, at a rate of 2.0m2 per litre (pavers) 1st coat & 3.5 m2 per litre 2nd coat. A two-coat spray application is required to fully cover the jointing sand. The sealer will be tack free within 2 hours at 20°C and foot traffic may be permitted after 4 hours. Vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C. These times may be increased or reduced depending on the ambient temperature. During the curing cycle, protect from rain. Do not apply when the ground temperature is above 30°C or below 5°C. All equipment should be cleaned with Smartseal cleaner fluid after use.

Deicing salts should not be applied directly on Smartseal block paving or concrete sealers. Salt chemically reduces the temperature at which water freezes and will result in water ingress into the concrete. Subsequent freezing may result in the concrete ‘seal’ being broken by the expansion of water as it freezes and white ‘pitted’ areas may become visible.



New block paving or cobble stone paving should be swept clean, ensuring there is sufficient well-compacted sand in the joints. Existing paving should be pressure washed to remove all surface debris. If the area is contaminated with weeds & moss then it should be treated with Smartseal Fungicidal Wash. Oil and other stains should be removed using Smartseal Cleaner / Oil Remover. The treated area should then be left to dry and the joints re-sanded & compacted to the lower edge of the paver chamfers with clean kiln-dried sand. Moisture in the paver & sand will inhibit penetration of the sealer and produce whiteness.

Technical & Test Data

Smartseal Block Paving sealer has been tested by the TRL (Transport Research Laboratory) and certified that it meets the SRV (Skid Resistance Value) for all categories of paving for local authority pedestrian areas and when heavily trafficked is suitable for special applications where risks of skidding are high as laid down in the UK Highway Authorities Tender Specification. Copies available on request.

Specification Clause

“Newly laid block or flagstone paving shall be treated with Smartseal block paving sealer to protect and stabilise jointing sand and enhance surface colour and increase abrasion resistance. All materials should comply with ISO9002 for Quality Assurance. All work should be carried out in conjunction with the manufacturer’s current technical data sheet and instructions for use”.

Health & Safety

Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator when applying. Store in a cool place. Flash point 40°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.

Product FAQs
Ask Us A Question
Send us a question


We offer a delivery service across Ireland for all of our products. 

We provide a comprehensive guarantee of quality and ensuring a reliable nationwide delivery service to all our customers is very important. It does not matter if you live in Dublin, Cork, Sligo or Limerick, our service is as consistent and reliable as can be. This is a testament to the many satisfied customers that have commented on our delivery service over the years. 

We can deliver to another address if you are not going to be in to receive the products. If you notify us with clear delivery instructions, we can also leave with a neighbour or somewhere at your property without a signature.

It is also our aim to monitor our stock levels closely to ensure we can always fulfill demand and make sure products are sent out as soon as possible.

Please read the section relating to deliveries under our Terms and Conditions.

Share this product