From 4.05*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By Maria FFROM Killarney

easy to apply, dries very fast in a sunny day - we have the sealer about a month on the roof and so far the seal looks pretty good - we did 2 layers of seal

Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

ROOF TILE SEALER - Highly Protective, Impregnating & Breathable Protects from MOSS, ALGAE & WATER Ingress

Clear Protective Impregnating Roof Sealer for Concrete, Slate, and Clay Roof Tiles. Safe & Easy to Apply

In Stock
Please select a size
Visa Electron
Product Description

Roof Sealer for Concrete, Clay & Slate Roof Tiles

Highly effective roof tile sealer and moss inhibitor

Smartseal Roof Tile Sealer is a impregnating  solvent free, breathable  sealer suitable for all types of porous roof tile or slate. Application of the sealer creates an excellent water repellent barrier to old, porous or low quality roof tiles.. By helping to keep the roof tiles dry, roofs are also protected against future contamination  from green algae and lichens.

Product Benefits Include

  • One coat application
  • Suitable for all types of porous concrete, clay or slate tile.
  • Creates durable protective barrier, resistant to moisture, staining and green growth
  • Clear, dry, invisible finish, no change appearance of roof
  • Recommended Application by sprayer or brush
  • Dry 2-3 hours
  • Fully water resistant after approx. 24 hours
  • 10 yr+ guaranteed lifespan
  • Solvent free, breathable sealer
  • Eco-friendly and Safe to use

Coverage: On concrete & roof tiles 1 x 25 litre will treat up to 125 m, 200-250 m2 on clay & slate roof tiles. 


PREPARATION: Prior to application of the roof sealer ensure the roof tiles or slates are completely clean and dry. The roof should also be free from moss or algae spores. On old roof tiles pressure washing and the application of suitable biocide is essential for best results.

APPLICATION: Apply by hand held sprayer or brush, apply to saturation, it is recommended that after around 20-30 minutes a light second 'wet on wet' coat is applied.Not to be applied if threat of rain or temperatures below 10°C.  Apply to test area first, mix container before use.

Clean equipment with water immediately after use.

SHELF LIFE: Use as soon as possible after opening. Store away from sun and sources of heat. Avoid frost and low temperatures.
Can be stored for 12 months (in original sealed container).

Product FAQs
Ask Us A Question
Send us a question


We offer a delivery service across Ireland for all of our products. 

We provide a comprehensive guarantee of quality and ensuring a reliable nationwide delivery service to all our customers is very important. It does not matter if you live in Dublin, Cork, Sligo or Limerick, our service is as consistent and reliable as can be. This is a testament to the many satisfied customers that have commented on our delivery service over the years. 

We can deliver to another address if you are not going to be in to receive the products. If you notify us with clear delivery instructions, we can also leave with a neighbour or somewhere at your property without a signature.

It is also our aim to monitor our stock levels closely to ensure we can always fulfill demand and make sure products are sent out as soon as possible.

Please read the section relating to deliveries under our Terms and Conditions.

Share this product