Imprinted Concrete Sealing Broom
Customer Reviews
top quality service from Nigel, quotation right through to application. The product is simple to apply and has provided a finished product exactly as Nigel suggested it would. I didn't think the drive would look so good after 10 years plus with zero maintenance and all the original colour worn from some areas. Best advice is make sure you pull all loose bristles from broom before use and do not apply in direct sunlight it will blister.
Works really well with sealer.
Brilliant for the job, fits in the tin. Removed all loose bristles before use, only a few came out while using but easy to pick up.
Delivered within a day. My only criticism would be the number of bristles which came out when using the brush, which I found to be a real nuisance.
Pleased that we purchased this broom as it made applying the sealant very easy and the job was completed in no time.
As others say, need quite a lot of shaking to remove initial loose bristles. Is really only a stiff yardbrush witha short head to fit in the bucket. Could have used my old one if I had cut it down - but the dried sealant on the brush would have rendered it useless for normal use so would have had to buy a replacement anyway.
Certainly well wrapped for delivery, it took ages to get the packaging off! The handle was too large for the brush head and didn't fit, but luckily I had a spare handle in my shed that fitted. Initial bristle loss, but after that, it worked well and did the job.
excellent product did a good job!
Spend time removing the loose bristles prior to use. Fits drum and makes applying the sealant very easy leaving a nice finish.
Loose bristles were a minor irritation, and I did leave some puddles, but I used a very coarse roller for last two coats which worked well.
Strong and robust. Makes the application of the sealer quick and easy. Watch for any loose bristles. A great finish to the sealer.
Same as person before few Brussels off but did the job
Ideal for the job, no problems
After an initial shedding of a few bristles it worked just fine. Just the job. The only problem I had was removing the shrink wrap packaging!
Reasonable product but does have a tendancy to looseits bristles easily which remain embedded in the sealer
Fitted in the barrel perfectly. Just remember to get of the loose bristles. Perfect for the job
Loose bristles at first, but when worn in did good job.
Made sealing drive much easier and speedier but ensure loose fibres are removed first though even then had the odd one on the sealer but most brushes suffer from this.
A good way of applying the sealant but be vigilant with getting rid of loose bristles carefully before you start. Advice which is reflected in most comments already. Results were very good.
The broom has made the application of Smartseal faultless
Broom was just right size to fit in sealant drum. Get shot of the loose hairs first then perfect job
Excellent product and fast delivery
Did the job Suggest "FinerHair" Might bean improvement?
5 i should have read the reviews before using the brush and got rid of any loose bristles. Other than that it did the job well enough.
excellent broom for applying sealers strong and robust
Easy to use... you must check it for any loose bristles before using it. Very please with the finish.
Light and easy to use, make sure loose bristles are removed before usage.
the sealing broom worked a treat.
It's a Broom what can I say it put the sealer on just fine, watch you dont put to much on and scrub to hard as it will leave bubbles, second coat sorted that out though.
I know a broom is a broom, but make sure you do as instructed if using to put on your sealer, get all the loose bristles off before you start. Did a great job with this product.
HAVE A QUESTION?
Description
10" soft yard broom for use when applying sealing pattern imprinted concrete sealer. Fits into the drum so the sealer can be applied from drum without decanting.
Before it is used for the first time, remove any loose hairs. A re-usable broom that will harden after use. It can be re-immersed into the concrete sealer in future and will soften up after a few minutes. When using for the first time, place the head of the broom into the sealer for 10 minutes to allow the hairs to soften up. Imprinted Concrete Sealing Broom for Driveways and Patios
*See technical description for full application instructions prior to use.
Technical
Once purchased, you will only require one sealing broom, but 1st time it is used, often like any natural hair broom, it will shed hair.
Application by plastic hair broom or roller is not advised, use of roller will tend to leave excess sealer in the joints, which can create problems.
Please follow instructions below prior to use.
1. Before use rub the broom head on an abrasive surface and remove any loose hairs.
2. If you are using any Colour Tints or Anti-Slip Additive, stir regularly to the bottom of the drum, to keep additives in suspension.
3. Once finished, do not attempt to clean broom, just leave to dry.
4. When you are ready to use broom again, whether it is 1 day, 3 months or 5 years, just leave immersed in sealer for 5 minutes, it will soften up again and be ready for use.
It is that simple, the broom works great for applying imprinted concrete sealer, enabling you to use the product sparingly and not leaving any excess in the joints.
In summary, your sealing broom will literally last forever, you just need to get rid of any loose hairs, prior to use. If a few hairs still get stuck in the surface, do not worry, they will soon be released as the initial 'tackiness' of the sealer diminishes.
Great size for the tin. Good value.