LIMESTONE SEALER - Colour Enhancer - Rich, Beautiful Finish - Easy to Apply, Highly Protective Sealer
Customer Reviews
Really good product
brilliant product, it changed my tired looking dull black limestone patio into a bright looking one, just like when it was wet, Definitelyrecommend this product. goes along way on application.
i was a little apprehensive about the product before use, but i used a pump action pressure sprayer and the difference was immediate and stunning - really pleased and have plenty to reapply whenever the sheen fades
Excellent sealer rolled 2 coats on limestone patio, superb result, definitely recommend
Very good product easy to use on Limestoneu and it brings out the colors in the stone
Was very pleased with the prompt service
TO HAVE GRANITE, OR NOT TO HAVE GRANITE? That is the question. Posted on Tuesday, August 6, 2013 by very few ietnrnet sites that take place to be detailed beneath, from our point of view are undoubtedly effectively really worth checking out
TO HAVE GRANITE, OR NOT TO HAVE GRANITE? That is the question. Posted on Wednesday, April 24, 2013 by Hi buddy, your blog's type is simlpe and clean and i like it. Your blog content are superb. Please hold them coming. Greets!!!
i was a little apprehensive about the product before use, but i used a pump action pressure sprayer and the difference was immediate and stunning - really pleased and have plenty to reapply whenever the sheen fades
HAVE A QUESTION?
Description
Natural Stone Sealer with Colour Enhancing Effect
Protective impregnating sealer to enhance the colour of Natural Stone
Smartseal Indian Sandstone Sealer and Natural Stone Sealer is a high quality, clear, solvent free acrylic impregnating coating system. Application of the sealer will alter the chemical structure of the porous sandstone or natural stone providing a excellent water repellent and stain resistant surface.
The sealer, once applied, will give a damp or slightly wet look finish on natural stone and enhance the original colouring of the surface.
- 1 x 25 litre will treat up to 150 m²
- Resistant to algae, lichen and staining
- Will leave surface darker or 'damp' looking dependent on porosity of surface
- Average coverage 5 - 10 m² per litre first coat and 10 - 20 m² per litre second coat, dependent on porosity and finish of surface
- Application by roller or sprayer
- Touch dry 2 - 3 hours
- Fully waterproof in 24 hours
- Lifespan of up to 5 years can be expected
- Suitable for Sandstone** (see exceptions below), Limestone, Terracotta, Slate, Marble and Granite
- Can be used externally or internally
**Exceptions to Sandstone suitability:
Please note this product is not suitable for Kandla Grey (mid and light grey) sandstone
.
Technical
PREPARATION: Prior to application of sandstone sealer or natural stone sealer ensure surfaces to be sealed are clean, dry and free from contamination. If algae or stains are present pre-treat prior to cleaning with an appropriate cleaning product.
**If applied to a surface where a "sweep-in" pointing compound has been used within the last 6 months, the natural stone must be fully cleaned with Smartseal Residue Remover prior to sealant application.**
APPLICATION: A suitable pressure sprayer or roller is recommended taking care to avoid any pooling. Application on all substrates should be to full saturation and on vertical surfaces commence at the bottom and work upwards.
Remove any excess after approx 30 - 40 minutes.
- For best results, apply one coat to saturation, and once touch dry (normally around 45 min), apply a second coat "wet on wet" (which means before the 1st coat has totally dried)
- Do not apply in damp conditions
- Application temperature range: 15° to 23°C
- Shake container well before use.
All equipment should be cleaned with water immediately after use.
SHELF LIFE: Store away from direct sunlight and sources of heat. Protect from frost.
12 months (in original sealed container).
Very good, brought my sand stone back to black